Signmax.us ~ View topic - How to set a Redsail and SignMax cutter in WinPCSIGN?

Author

Message

< Vinyl Cutter sign making ~ How to set a Redsail and SignMax cutter in WinPCSIGN?

Ivan

Posted: Tue Jun 30, 2020 6:12 pm

Joined: 19 Apr 2007 Posts: 353 Location: Montreal

How to set a Signmax (Redsail) cutter in WinPCSIGN
Comment configurer un decoupeur Signmax (Redsail) dans WinPCSIGN

The old model of Redsail cutter needs an FTDI driver to run. You can select a USB or a Com port from WINPCSIGN/Setting/Plotter code/Port....

L'ancien modèle du decoupeur Redsail a besoin d'un pilote FTDI pour fonctionner. Vous pouvez sélectionner un port USB ou Com dans WINPCSIGN/Setting/Plotter code/Port....

Here is a video

If you don't have the driver FTDI, click here to download
(After downloading, double-click to install. Depending on your computer select:
CDM_x64_Setup.exe or CDM_Setup.exe

Si vous n avez pas le pilote FTDI du cable USB, cliquez ici pour telecharger
Apres avoir telecharger, double cliquez pour decompresser. Selon votre ordinateur selectionner:
CDM_x64_Setup.exe or CDM_Setup.exe

Attention: New Redsail cutters run using
CH3 driver

_________________
Ivan Polanco, Sales manager/Support
Signmax.us Profesionnal signmaking ressources

All times are GMT

View next topic View previous topic Page 1 of 1 Signmax.us Forum Index ~ Vinyl Cutter sign making

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum